For the record, it's physically impossible to break the 50ms gap. It's not a rule, it's a setting.
When it comes to attacks SENT from a village in close succession, again, it's physically impossible to send them with less than a 50ms gap between them.
Not true. I'm unsure if we are even talking about the same thing here.
I'm not overcomplicating things. I'm simply clarifying that the gap applies to 1 attack with a max of 5 attacks in succession. Supports are
not limited to 5. If you send
two different attacks/supports at two different speeds to the same village from the same village, you can send within 50ms gap(or 250ms interval) This also applies to support and sniping at different speeds. The settings will not automatically send them before or after the gap.
It requires a good skill at timing. I.e. test this simple step by step process:
Step 1: Send a train to a barb at ram speed in 50 ms intervals.
Step 2: Send a train to a barb at sword speed in 50 ms intervals.
Step 3: Send a train to a barb at spear speed in 50 ms intervals.
Step 4: Send a train to a barb at HC speed in 50 ms intervals.
Step 5: Send a train to a barb at LC speed in 50 ms intervals.
Step 6: Send a train to a barb at SC speed in 50 ms intervals.
Step 7: Time them to land all at 00:00:00:000 ST
Since these are all 6 different attacks, you can have all 6 attacks (5 attack train) land
hypothetically with 100% perfect(this is physically impossible) timing at:
00:00:00:000
00:00:00:050
00:00:00:100
00:00:00:150
00:00:00:200
I've done this countless times when sniping from the same village at different speeds(they don't land at the same exact MS but all within the same MS intervals. 250 MS interval in w100 settings. Thus showing you it applies to attacks in succession only. A newly timed attack from the same village X amount of time later as long as it's another troop speed is allowed and the settings won't prevent this.